spec-00479 g 1 subject to change without notice accessories equipment protection solutions locks, lockouts, l a tches, ha nd l es a nd cla mps locks spec-00479 g 763.422.2211 763.422.2600 accessories locks, lockouts, latches, h and l es and cl amps locks lock k it for cla mp c over junction boxes designed for field installation in standard clamp-cover junction boxes. includes complete installation instructions. one hole must be drilled or punched in the cover to receive the cylinder lock. punches for hoffman locks and latches are available from greenlee punches. for more information on greenlee punches, go to http:// www.greenlee.textron.com/ bulletin: a80 catalog number l (in.) l (mm) acljic 1.25 32 lock k it for t ype 3 r a nd 12 e nc l osures designed for field installation in standard one-door type 3r and 12 enclosures. includes complete installation instructions. one hole must be drilled or punched in the door to receive the cylinder lock. bulletin: a80 catalog number l, for nema 12 enclosure in./mm l, for medium 3r hinged-cover enclosure in./mm aclsn12 1.69 43 2.25 57 pa d l ock k it for junction boxes designed for field installation on standard lp, ch and chnf junction boxes. maintains water-tight and dust-tight seal. to install simply drill two holes in the cover and two holes in the body. includes complete instructions. padlock kit is plated steel or type 316 stainless steel. bulletin: a80 catalog number description aplkjic plated steel aplkjic6ss type 316 stainless steel r ep la cement k eys fits proline? network cabinet and networking wall-mount cabinet. bulletin: da cc y catalog number key code includes use with e2233key 2233 2 keys proline? , net series, pc cabinet, soho e333key 333 2 keys accessplus? ii, l-box? , d-box?
spec-00479 g 2 ph 763.422.2211 ? fax 763.422.2600 ? hoffmanonline.com equipment protection solutions accessories locks, lockouts, l a tches, ha nd l es a nd cla mps lockouts lockouts sa fety lockouts provide a means of using multiple padlocks on a secured power source. catalog number asl6c includes a 10.00-in. (254-mm) plated steel chain. manufactured from 10 gauge steel with six station holes. red finish. overall length is 5.06 in. (128 mm) and padlock holes are .38- in. (10-mm) in diameter. bulletin: a80 catalog number description asl6 without chain asl6c with chain d u al -access sa fety lockouts provide a means of using two padlocks on a secured power source. either padlock can be removed enabling power to be interrupted and enclosure accessed. catalog number asldac includes a 10.00-in. (254-mm) plated steel chain. lockouts are manufactured from 10 gauge steel and finished in red. padlock holes are .38-in. (10-mm) in diameter. padlock is not included. bulletin: a80 catalog number description aslda without chain asldac with chain
spec-00479 g 3 subject to change without notice accessories equipment protection solutions locks, lockouts, l a tches, ha nd l es a nd cla mps latches latches t - ha nd l e l a tch a nd k eyed c y l inder lock k its to install, simply remove the standard slotted latch and insert the kit. complete installation instructions are furnished. catalog number al7a includes a type l7 t handle and all hardware. catalog number al12ar includes a type l12 cylinder lock, cam and all hardware. latch and lock fit type 1 enclosures and hinged-cover pull boxes. bulletin: a80 catalog number description al7a t handle latch kit al12ar cylinder lock kit l a tch k it for o ne- d oor t ype 12 e nc l osures designed for field installation on most standard one-door type 12 enclosures. these latch kits will not fit hoffman disconnect, concept? or proline? enclosures. each kit includes a handle, latch, latch rods, adjustable rod guides and all hardware. the latch rods can be adjusted to maintain the proper gasket compression by relocating the pins in the rod guides. when the pin is removed, the latch rod can also be removed. these kits are available with a key locking handle, a non-locking handle or a padlocking handle. all openings through the door are gasketed to assure a complete seal. ends of latch rods have rollers for easier door closing. bulletin: a80 catalog number handle type opens description al36a padlock either clockwise or counterclockwise 1-point latch kit al2a keylock clockwise 1-point latch kit al2accw keylock counterclockwise 1-point latch kit al3a non- locking clockwise 1-point latch kit al36br padlock either clockwise or counterclockwise 3-point latch kit where a is 16, 20, 24 or 30 in. al2br keylock clockwise 3-point latch kit where a is 16, 20, 24 or 30 in. al2bccw keylock counterclockwise 3-point latch kit where a is 16, 20, 24 or 30 in. al3br non- locking clockwise 3-point latch kit where a is 16, 20, 24 or 30 in. al36cr padlock either clockwise or counterclockwise 3-point latch kit where a is 36, 42 or 48 in. al2cr keylock clockwise 3-point latch kit where a is 36, 42 or 48 in. al2cccw keylock counterclockwise 3-point latch kit where a is 36, 42 or 48 in. al3cr non- locking clockwise 3-point latch kit where a is 36, 42 or 48 in. al36dr padlock either clockwise or counterclockwise 3-point latch kit where a is 60 or 72 in. al2dr keylock clockwise 3-point latch kit where a is 60 or 72 in. al2dccw keylock counterclockwise 3-point latch kit where a is 60 or 72 in. al3dr non- locking clockwise 3-point latch kit where a is 60 or 72 in. see price list for factory installation charges. a is enclosure height. l a tch k its for t ype 4 a nd 12 e nc l osures fits type 4 and 12 enclosures which have external screw clamps. requires only a quarter-turn (90 degrees) to open or close. an internal o-ring and external gasket assure a water-tight and dust- tight seal. installation requires a hole punched or drilled in the door for each latch. complete instructions are furnished. a square or triangular key is required for tamper-resistant latches. latch is die-cast zinc with chrome finish. bulletin: a80 catalog number description al31 slotted insert AL32 7-mm square insert AL32y key for AL32 al35 7-mm triangle insert al35y key for al 35 t ogg l e l a tch for t ype 4 a nd 4 x fl oor- m ount a nd f ree- s t a nd e nc l osures provides quick access to type 4 and 4x floor-mount and free- stand enclosures with clamps. the 3/8-16 threaded, stainless steel toggle latches replace the standard stainless steel bolts. operation of the toggle releases the door clamp so the door can be opened without tools. two type 316 stainless steel toggle assemblies included. bulletin: a80 catalog number description aft44xss 2 toggle latches
spec-00479 g 4 ph 763.422.2211 ? fax 763.422.2600 ? hoffmanonline.com equipment protection solutions accessories locks, lockouts, l a tches, ha nd l es a nd cla mps h and l es h and l es po w erg l ide ? ha nd l es easy-to-install medium-size powerglide handles fit into existing handle holes. they are available in clockwise and counter- clockwise non-defeater models and a clockwise defeater model. the clockwise defeater model includes door hardware for bulletin a25 enclosures. bulletin: a80 catalog number description al55cw medium powerglide handle - clockwise opening al55ccw medium powerglide handle - counter-clockwise opening al55cwd medium powerglide handle - clockwise opening with defeater and door hardware ha nd l e k it non-metallic handle for small enclosures. includes four rubber bumpers that mount on back of enclosure to protect exterior finish. all mounting hardware and complete installation instructions are provided. bulletin: a80 catalog number description dhdlk handle kit ha nd l es attach to sides of enclosure to provide maximum operator control when using a pendant arm, swivel or swivel tilt. bulletin: c 2, cc 1, cc 2, d ec 1, p 1 catalog number description fits ercfh3u 132 mm desktop case ercfh4u 177 mm desktop case ercfh6u 266 mm desktop case puhka 248 mm proline sloped fronts puhk 9.75 in. proline sloped fronts locking t ha nd l e optional locking t-handle available for replacement of the quarter- turn latch (order separately). bulletin: t 90r3 catalog number description altc3r available for replacement of the quarter-turn latch
spec-00479 g 5 subject to change without notice accessories equipment protection solutions locks, lockouts, l a tches, ha nd l es a nd cla mps cl amps cl amps fa st- o per a ting cla mp- c over junction box cla mp provides quick access to enclosure or wireway interiors. installs on standard clamp bracket used on hoffman junction boxes, type 12 trough and wireway, type 4x wireway and similar custom enclosures. clamps are available in plated steel or stainless steel. bulletin: a80 catalog number description al23 plated steel clamp al23ss stainless steel clamp fa st- o per a ting cla mp assem bl y provides quick access to enclosures which have screw clamps. install on clamp brackets used on single-door type 4, 4x, 12 and 13 enclosures and similar custom order enclosures. the entire clamp assembly is type 316 stainless steel. bulletin: a80 catalog number qty. afc412ss 2 cla mp k its these kits provide replacement clamps for clamp-cover junction boxes and wall-mount enclosures. each kit contains two clamps and all mounting hardware. bulletin: a80 catalog number material use with al15 mild steel a12 enclosures al16 stainless steel a4, a4s enclosures al17 mild steel a51 junction boxes al18 stainless steel a51s junction boxes cla mp b l ock k it used on floor-mount and free-stand type 4x stainless steel enclosures with clamps. kit includes two sets of screws, two type 316l clamp blocks and mounting hardware. bulletin: a50y catalog number description acbk6ss 2 clamp blocks and screw sets
spec-00479 g 6 ph 763.422.2211 ? fax 763.422.2600 ? hoffmanonline.com equipment protection solutions accessories locks, lockouts, l a tches, ha nd l es a nd cla mps cl amps n otes
|
